A malfunctioned garage door does not need you to pay someone to fix.  Trust me; you can do it on your own even if you are just an immature handyman.

Basically, the garage door consists of two parts, the first is the garage door itself and the second is the operating mechanism. It is the part that is responsible for opening and closing actions. If you examined the walls of the garage thoroughly, you will notice some metal tracks that are controlled with the help of large-sized springs. These garage door springs and tracks help the door to move smoothly. There are several reputed garage door companies like, Core Garage Door Repair that offer a wide range of garage door repair services. You can choose the one as per your requirements and budget. 

There are three important procedures that you can perform to get back your garage door in a tip-top position. The first one is the inspection and maintenance of metal tracks. As you know, metal tracks are the parts used to move the garage door. They can be broken down due to frequent usage. To inspect them, check the brackets which are connected to the tracks of the walls of the garage. If you found anything wrong like loose screws, nuts, or blots than tighten up them. If you found any rusted or damaged part replace it immediately even its shape is distorted.

Another important factor for garage door repair is to check the balance or alignment of garage door tracks. Maintaining garage door balance is very important because it is a mechanism that supports the garage door to run efficiently. You should align the tracks parallel to each other. All the horizontal tracks should be adjusted a little lower than the backtracks. Once you adjust the track thoroughly. Test the balance of garage door with measuring level. If they do not align properly, simply loosen the bolts and screws then readjust them to their accurate positions.

Garage door springs repair is also critical but important task. Garage door torsion springs are imposed under high amount of pressure that is why, they can break easily. Since garage door springs are used frequently, they need maintenance to move their hook to extend their life.

In case, springs become damaged, you just need to replace them with the new one. You should follow all the safety precautions while doing this job, especially if you have a roller garage door. These types of garage doors are operated with pulleys and cables along with the garage door springs. To fix theses springs, simply remove the cables and pull at the plate placed above the garage door. Once the required tension is provided, fix the knot completely to stabilize the tension.

NOTE: garage door spring repair and replacement are very challenging and dangerous work. Don’t try to attempt any DIY garage door repair project. It will kill you if you are not familiar with the garage door and not comfortable with the handy tools. It is strongly suggested that hire a professional garage door repair company to handle all the problems of the garage door.